Cable
Tie Tool - Heavy duty, light weight metal installation
tool for use with 18 - 50 lb. ties. Automatic cut-off
and adjustable tensioning for dependable use in assembly
applications.
Actual color of tool subject to change
$28
Heavy Duty Cable Tie Tool
- Rugged metal construction makes this tool ideal for
use with our 120 - 250lb. ties. Cinch tie to desired
bundle size and pull trigger to cut excess material
flush at cable tie head.
Actual color of tool subject to change
$30
Our
most Popular heat gun
The VT-1100 heat gun is a long lasting, durable economy
heat gun suitable for use with heat
shrink tubing, paint and varnish removal, melting
of adhesives, loosening of rusted bolts, fittings and
nuts.
It is UL and CSA approved, and has a wide temperature
range from 250 to 1100°F, controlled by the dial on
the back of the unit. The two air speeds make it even
more versatile
The handle comes with a hanging ring, which also functions
to point the unit upright for easy shrinking of heat
shrink tubing. Powered using standard 120VAC electrical
outlets, unit consumes 1200 Watts (less than a hair
dryer).
Please note: Color subject to change without notice
VT-1100 Heat Gun
$35
Heavy Duty Carrying case with 3 attachments (5/8” concentrator,
3/8” concentrator & shrink tube reflector)
$22
Note - Heat gun and Carrying case sold separately
Our Mini
Electric Heat Gun is capable of temperatures up
to 500F, with overheat protection, and consumes 350 Watts
of power. It's perfect for the budget conscious hobbiest
who needs an inexpensive heat gun that will last through
light to medium duty projects
$25
The
Iroda Turbo-Lite MJ 280 is
a small, hand held butane torch that is great for camping,
household repairs, odd jobs, and heat
shrink tubing.
$8.50
The Micro-Therm
MJ-600 is a great inexpensive pocket sized cordless
butane heat source. It functions as a great alternative
to electric heat guns. It is ideal for hobbies, automotive,
household, and heat
shrink tubing projects. Comes standard with a refillable
butane housing, a waterproof piezo electronic ignition,
safety lock trigger, and a reflector shield for use with
heat shrink. Reaches temperatures of up to 1200°F. Each
fill will run for approximately 20 minutes; however it
is not recommend to run the MJ-600 for more than 5 minutes
continuously.
$25
The Ultra-Therm MJ-950 is
a hand-held butane operated flameless heat gun that is
perfect for general heating and drying applications, activating
adhesives and curing agents, bending PVC, removing windshield
caulking, and installing all varieties of heat shrinkable
tubes (including polyolefin,
PVC, dual
wall / adhesive lined). Reaches temperatures up to
1400°F. Comes in blister packaging with heat shrink deflector
and stand.
$65
The
Solder Pro 100K is a completely
portable multi-function heat tool that can be used as
a soldering iron, heat gun, hot knife cutter and blow
torch all in one! The soldering iron tip makes this
unit comparable to a 100 watt electric soldering iron.
The blow torch (use without any tip attachments for
temperatures up to 2400°F) is perfect for heavy soldering.
With the heat blower or deflector attachments, the unit
is ideal for heat
shrink tubing. Finally, the hot knife attachment
makes this a great way to get a fray resistant braided
sleeve.
$80
Our Bench-Mount
Hot Knife is a great way to get a true non-fray
end on your braided sleeving. Just simply turn it on,
and run the sleeve down the blade, and the sleeve is cut
very easily. Just make sure you're in a well ventilated
area. For a picture of our bench mount hot knife cutter,
click
here
$99
Replacement Blade - $17.50
The Iroda Thermoglue TG-600
Glue Gun with push button ignition is ready for use in
under 3 minutes! Powered by LEC Techology (removable butane
chamber), ignition is easy and it can be stored safely
without risk of accidental activation. Push button piezo
electric ignition switch. Uses standard 1/2" glue
stick and works for 100 hours continously on one charge.
Package comes with gun, two LEC fuel chambers and 3 glue
sticks
